The action cycle of the egg tray device, that is, the working mode and process of the egg tray device, can be artificially controlled. The technical requirements for controlling the action of the egg tray equipment are as follows. The action cycle of the egg tray equipment is a cycle of moving down from the mold, suctioning, moving up, cold extrusion, hot pressing, material transfer, etc.
The whole process of the egg tray machine is a sequential process, so it is controlled by the controller to realize the sequential action cycle. The main technical difficulties are:
Since the pulp molding production process involves cold extrusion molding, hot pressing and setting processes, and the two processes cannot be combined, there is a problem that the transfer of the paper molding products is inevitable.
This problem can be solved by a microswitch with programmable coordination control.
When the product is quasi-successful, the transferred product presses the microswitch, and the microswitch sends the receiving information to the programmable controller. If the receiving is successful, the next action is continued, and if the receiving fails, the receiving is repeated three times.
Otherwise, the alarm will be stopped and wait for the operator to continue processing.
The action cycle control of egg tray equipment is an important part of the egg tray production line, so the importance of cycle control is particularly important in the production process.
No comments:
Post a Comment