How much influence does the egg tray forming process have on the quality of the egg tray?

  The egg tray machine is a new sight in the industry after 2018, but in the face of this new scene, many customers have become hesitant about how to look at the status of the egg tray production line, because on the surface, most customers It is only seen that the increase in costs, the increase in investment is that the profit has not increased.

    At present, the egg tray production line and the pulp molding equipment production equipment are a period of industry change, that is, an excessive period that makes our industry more standardized. For investing in a new type of egg tray production line and transforming a coal-fired production line into a new gas production line, it must be the new investment in the egg tray production line, the transformation period of the transformation line is very long, and there is a reconfiguration of the old equipment and the new production line. Even some of the original production lines could not transform the gas production line.

    The electric appliance controls the solenoid valve and the cylinder part. Each solenoid valve has a proximity switch control. The cylinder has a proximity switch control solenoid valve and a solenoid valve control cylinder. The cylinder then controls the dehydration valve, wherein the four parts are mutually constrained. Failure to work causes a chain reaction that prevents the machine from working. In order to minimize the failure rate of the machine, use the machine as much as possible, reduce the number of electrical appliances, and use pneumatic components as little as possible. The machine composition should be as simple as possible and simpler. The mechanical structure is used as much as possible to make the machine simple and easy to find and easy to repair.

    The hydroforming method of paper forming is mostly used for the molding of industrial packaging products. It is used in the paper forming of egg tray machine but it is not as widely used in vacuum forming. The hydraulic forming technology of paper mold has been widely applied to our industrial packaging. Among the equipment

    In the molding process, mainly through the adsorption molding of pulp, there is a problem involving the quality of egg tray products, that is, the adsorption is not enough (vacuum degree), the product quality will be greatly reduced (such as egg tray products, no toughness, It is not caused by insufficient adsorption. The force of adsorption is derived from the suction force of the vacuum pump, that is, the force of dehydration. If it is too large, it will easily cause the mold of the egg tray product to be damaged. If it is too small, the quality will be too poor. Control of suction is important.

    Pulp molded paper products are typical green products, environmentally friendly and reusable. They are the best alternative to traditional expanded polystyrene-EPS foam products, which can effectively alleviate the problem of “white pollution”.