Introduction of pulping equipment for egg tray equipment

Egg tray equipment For the pulping process, this step is very simple for products that do not need to add other additives or need to be adjusted. However, if you want to add additives or need to adjust the pulp, this step is very important, because the additives are This means that the egg tray will take on other new functions, such as waterproofing, so it is necessary to strictly control the weight of the additive and then make the function work properly. This requires the pulping to be completed, and then the work is complicated and Important.

The egg tray equipment is also very important for the egg tray molding process. Why? Because in the molding process, mainly through the adsorption molding of the pulp, there is a doubt that the quality of the egg tray is touched, that is, the adsorption is not good (vacuum degree), the quality of the product will be greatly reduced (for example, the egg tray is bad, no Patience, no stiffness), which is formed by adsorption, the force of adsorption is derived from the suction of the vacuum pump, that is, the force of dehydration. If it is too large, the mold is simply damaged. If it is too small, the quality is too poor, so The handling of suction is especially important.